HACKING TIPS

Hack another computer with Software (ProRat)

1. Download ProRat. Once it is downloaded right click on the folder and choose to extract it. A       password prompt will come up. The password will be “pro”.

Click Hear To Download

2. Open up the program. You should see the following:

3.Insert the IP address and connect .

4. When you connect to other PC...You have do  all these  things   which u seen on the ProRat Screen...

5. Simple and Easy to use...

6. 100% Working..

Enjoy..

Hack another computer with cmd

................................................................

first you need angry ip scanner from http://www.angryip.org/w/Download run it and insert the ip range you have to add port 139 then start scanning .

it scans ip address. it gives three types of result red for not found blue for alive but on other port.

green which is on 139 port.

you try on green ip address (for exp if ip192.168.1.1)

then works start

open cmd

type nbtstat -a 192.168.1.1

it shows the net bios name.

if there is 20 in any name then the user have sharing something if there is no 20 then try on another ip address

if there is 20 in names then write another command.

type net view 192.168.1.1

it shows shared resouces

it shows shared folders

if user have a printer it also shows printer

then you type another command

type net use a:\\192.168.1.101\drive name

it says command complete succesfully.

open my computer you see that a new drive comes which is network drive.....

(OR)

THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER. NETBIOS HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING PROCEDURE

1.      Open command prompt

2.       In the command prompt use the “net view” command

 ( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP TOOLS” SOFTWARE BY              ENTERING RANGE OF IP ADDRESSS. BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).

Example: C:\>net view \\219.64.55.112

The above is an example for operation using command prompt. “net view” is one of the netbios command to view the shared resources of the remote computer. Here “219.64.55.112″ is an IP address of remote computer that is to be hacked through Netbios. You have to substitute a vlaid IP address in it’s place. If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown. If not an error message is displayed. So repeat the procedure 2 with a different IP address.

3.           After succeeding, use the “net use” command in the command prompt. The “net use” is another netbios command which makes it possible to hack remote drives or printers.

Example-1: 

C:\>net use D: \\219.64.55.112\F

Example-2: 

C:\>net use G: \\219.64.55.112\SharedDocs

Example-3: 

C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES, FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER. THAT IS, IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT

F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer. These are displayed after giving “net use” command. “219.64.55.112″ is the IP address of remote computer that you want to hack.

4.            After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.

Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name. You can open it and access remote computer’s Hard-Drive. You can copy files, music, folders etc. from victim’s hard-drive. You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system. You can access files/folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios. That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed). So Repeat The Procedure 2,3 With Different IP Address.

HAPPY NETBOS HACKING!!

                                                      Please comment  if u like